2014 Exmark LZE691KA524 - E-Series 52" Deck, Kawasaki FX691V

Call For Price


Availability
Brochure
Year
2014
Manufacturer
Exmark
Model
LZE691KA524 - E-Series 52" Deck, Kawasaki FX691V

Overview

Description

Lazer Z® E-Series: The definition of value.





The E-Series is the perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z, but in a value package. The E-Series features the same welded, heavy-duty, 1.5" x 3" tubular steel unibody frame found on more expensive Lazer Z models. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. In short, the Lazer Z E-Series strikes a perfect balance of value and performance.

Features
  • Safety plus convenience: Our Rollover Protection System (ROPS) is engineered for more than safety. Its rear-sloping design also diverts branches away from the operator. And it folds easily for transport.
  • Single-point height adjust: This simple system lets you adjust deck height without resetting rake and level. Set height of cut from 1 to 5.5 inches by simply moving a bolt.
  • On-board diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • Hydro drive simplified: Our hydro drive system has no hoses to leak and just two, easy-to-change belts. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
Power Components
  • Engine: Kawasaki®
  • Model: FX691V
  • Displacement: 691
  • Air Filter: Heavy-duty canister air filtration system
  • Drive System: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Speed: Infinitely variable speed selection 0–8.0 mph (12.9 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
  • PTO Engagement: MagStop Electromagnetic 175 ft-lb clutch with spot brake
  • Fuel Capacity: 8-gallon (30.3-L) single fuel tank with single fill location.
  • Drive Wheel Release: Allows unit movement without engine running.
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Rollover Protection System (ROPS): 2-post foldable ROPS standard with seat belt and latch.
  • Casters: .50" thick caster yoke arms.
  • Cup Holder: Standard
  • CARB Compliant: No
Decks
  • Deck Construction: 10-gauge top that is formed and continuously seam welded with 7-gauge side skirt.
  • Deck Style: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Width: 52" (132.08 cm)
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Cutting Heights: 1.0" (2.5 cm) to 5.5" (14.0 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • Blades: 3 Blades at 18.00" Length
  • Blade-Tip Speed: Approximately 18,500 fpm.
Equipment
  • Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Front Caster Tires: 13 x 5.0-6, smooth-tread, semi-pneumatic.
  • Drive Tires: 23 x 9.5-12 Super Turf®
  • Parking Brake: Lever-actuated disc brake.
  • Seat: Commercial Grade High Back contoured foam padded with armrests. Adjustment: Fore and aft from Operators’ Position.
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
  • Electrical: 12-volt battery with 15-amp alternator.
Miscellaneous
  • Curb Weight: 1060 lbs
  • Length: 79.2 in. (201.2 cm)
  • Width: 64.8 in. (164.6 cm)
  • Height: 70 in. (177.8 cm)
  • Warranty: 2 Year Comm / 4 Year Cons

Specs

Engine

Engine Manufacturer
Kawasaki®
Engine Type
FX691V
Displacement
691 cc

General

Transmission
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors
Wheel Size
Front: 13 x 5.0-6; Drive: 23 x 9.5-12
Fuel Capacity
8 gal. (30.3 L)

Deck

Deck Size
52 in. (132.08 cm)
Discharge Type
Side; Optional: Bag, Mulch

Promotions


Related Products